Milan Technology MIL-SM801XX

3. You will now find that the default IP address has been changed to IP address

192.168.12.40. Reboot by typing “reboot” or “H”.

4. By similar methods, you can configure Subnet Mask (default subnet Mask is

255.255.255.0), Broadcast (default Broadcast is 255.255.255.255), and

Gateway (default Gateway is 192.168.1.6). The gateway address is the router

that can forward packets to the other IP networks.

Figure 3-4. Changing IP address by typing in “ ip-address 199.86.12.40 ” after the prompt .

Contents

Main Page Page Contents 1. Introduction Features Intelligent Management Features Package Contents Ethernet Switching Technology Management Methods 2. Hardware Description LED Indicators Rear Panel Page 3. Network Configuration Assigning an IP Address to the switch 1. From the Main Menu of the console, select Item 1 by typing in 1 after the 10 2. There are three command options to change the IP Address (the initial Default Page Page Page Page Page Page System Configuration Page Page Page VLAN 21 Page Page Boot Methods 6. Technical Specifications 7. Troubleshooting Incorrect connections 26 n Faulty or loose cables n Non-standard cables Appendix