Miller Electric Big Blue 500 X, Big Blue 400P manual Weld, Power, And Engine Specifications

SECTION 4 − SPECIFICATIONS

4-1. Weld, Power, And Engine Specifications

			Maximum
Welding	Weld Output	Rated Welding	Open-	Generator Power	Engine	Fuel
Mode	Range	Output	Circuit	Rating		Capacity
			Voltage
		Export Models:
		300 A, 32 Volts DC,
	55 − 500 A	100% Duty Cycle
		430 A, 37 Volts DC,	95
CC/DC	(CC Models)			Standard
	15 − 500 A	60% Duty Cycle		Single-Phase,
		300 A, 29 Volts DC
	(CC/CV Models)			4 kVA/kW, 34/17 A,
		(CV),100% Duty Cycle		120/240 V AC,	Perkins
		430 A, 36 Volts DC		50/60 Hz
		(CV), 60% Duty Cycle		Three-Phase Generator	Perkins 404-22	25 gal
		Other Models:		Option*	Water-Cooled,	(95 L)
		400 A, 36 Volts DC,		Single-Phase/Three-Phase,	Four-Cylinder,
CV/DC		100% Duty Cycle		12/15 kVA/kW, 50/36A,	32.6 HP Diesel Engine
		450 A, 38 Volts DC,		120/240 VAC, 60 Hz
(CC/CV	14 − 40 V		56	*In Addition To Standard
		60% Duty Cycle
Models				4 kVA/kW Generator Power
		500 A,
Only)
		30 Volts DC (CC),
		34 Volts DC (CV),
		40% Duty Cycle

4-2. Dimensions, Weights, And Operating Angles

	Dimensions
Height	60 in (1524 mm)
	(to top of muffler)
	28-1/2 in (724 mm)		G
Width	(mtg. brackets turned in)
	30-3/4 in (781 mm)
	(mtg. brackets turned out)
Depth	65-1/8 in (1654 mm)		Y Do not exceed tilt angles or engine could
			be damaged or unit could tip.
A	65-1/8 in (1654 mm)
			Y Do not move or operate unit where it could
B*	56 in (1422 mm)		tip.
C*	46-1/2 in (1181)	A
D*	9-5/8 in (244 mm)	B C
E	27-1/2 in (699 mm)
F	1 in (25 mm)			30°
G	29-13/16 in (757 mm)
		H		30°
H	9/16 in (14 mm) Dia.		20°
	4 Holes	D	20°
* With mounting brackets in center
position. Dimensions vary with
location of mounting brackets.			F
	Weight
			E
w/ Perkins	No fuel: 1600 lb (726 kg)		802 161-A
404-22	W/fuel: 1775 lb (805 kg)
Lifting Eye Weight Rating:
2500 lb (1134 kg) Maximum
OM-4421 Page 12