Miller Electric XMT 456CV manual Meter Functions For CC/CV Models, Panel Control Gtaw, Pulsed MIG

5-5. Meter Functions For CC/CV Models

.The meters display the actual weld output values for approximately three seconds after the arc is broken.

Mode			Meter Reading At Idle
			V			A
Panel Control (GTAW)		80.0		85
	Actual Volts (OCV)					Preset Amps
			V			A
Lift-Arc Trigger				85
Hold TIG (GTAW)
			Blank			Preset Amps
			V			A
TIG (GTAW)				85
			Blank			Preset Amps
			V			A
MIG (GMAW)			24.5
			Preset Volts			Blank
			V			A
Pulsed MIG			PPP			PPP
(GMAW-P)
			Pulse Display			Pulse Display
			V			A
Voltage-Sensing			80.0
Wirefeeder
	Flashes OCV And Preset					Blank
			V			A
Remote					85
Control SMAW
			Blank			Preset Amps
			V			A
SMAW			80.0			85
Panel Control
	Actual Volts (OCV)					Preset Amps

OM-203 034 Page 24