OPERATION

DANGER

NEVER operate machine in a confined area where carbon monoxide fumes can collect. Carbon mon- oxide, a colorless, odorless, and extremely danger- ous gas, can cause unconsciousness, serious injury or death. Do not operate in an enclosed area or near open windows, vents, or doors. Fumes from the unit can kill.

WARNING

Always wear safety goggles or safety glasses with side shields when operating this product. All eye protection must be marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.

WARNING

Do not use any attachments or accessories not recommended by the manufacturer of this machine. The use of attachments or accessories not recom- mended can result in serious personal injury.

CAUTION

The spray from your pressure washer is capable of causing damage to surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray. Avoid the use of a concentrated spray stream except for very strong surfaces like concrete and steel.

APPLICATIONS

You may use this product for the purposes listed below:

Remove dirt and mold from decks, cement patios, house siding, etc.

Clean cars, boats, motorcycles, outdoor furniture, grills, etc.

GENERAL INSTRUCTION

Do not operate this machine without the water supply connected and turned on. Operating the pressure washer with the water turned off will void your warranty and damage the machine. Never run this pressure washer for more than two (2) minutes without pulling the trigger to allow cool water to enter the pump and the heated (recirculated) water to exit.

Before attempting to start this product, always do the following:

1.Connect all hoses as described in the Assembly section.

2.Check all fluid levels.

3.Turn the garden hose on then squeeze the trigger to relieve air pressure. Hold the trigger until a steady stream of water appears and all “sputtering” from the spray wand has stopped.

page 13

Page 13
Image 13
Milwaukee 4555-22 manual Operation, Applications, General Instruction

4555-22 specifications

The Milwaukee 4555-22 is a powerful and innovative tool in the landscape of heavy-duty construction and renovation. Designed primarily as a wall cutter, this equipment is built to facilitate quick, precise cuts in a variety of materials, including brick, block, and concrete. One of its most appealing attributes is its formidable 15-amp motor that effortlessly generates a no-load speed of up to 4,100 RPM. This powerful motor not only enhances cutting efficiency but also extends the life of the tool through its robust design.

One of the standout features of the Milwaukee 4555-22 is its innovative adjustable depth control. This allows users to make cuts into materials with depths between 0-3 inches, making it a versatile tool suitable for diverse applications. Furthermore, the tool comes equipped with a lead screw that facilitates consistent depth settings, ensuring that users can achieve the exact depth required for their specific tasks without any guesswork.

The Milwaukee 4555-22 also boasts an ergonomic design, featuring an adjustable rear handle that provides a comfortable grip during operation. This feature is particularly invaluable for prolonged use, as it minimizes user fatigue and enhances overall control. Additionally, the integrated water feed system aids in dust management while cutting, thereby promoting a cleaner working environment and increasing visibility.

The characteristic durability of Milwaukee tools is present in the 4555-22 model. Its reinforced housing and components are engineered to withstand the rigors of heavy use on job sites, ensuring longevity and reliability. Moreover, the tool is designed for easy blade changes, allowing users to switch between blades tailored for different materials efficiently.

Another key technology featured in the Milwaukee 4555-22 is its integrated overload protection system. This feature prevents the motor from overheating during demanding tasks, thus safeguarding the tool and prolonging its operational lifespan.

In conclusion, the Milwaukee 4555-22 combines power, precision, and user-friendly design, making it an essential tool for professionals in construction and renovation. Its advanced features, from adjustable depth controls to integrated overload protection, underscore Milwaukee's commitment to innovation and quality, ensuring that users can tackle their toughest cutting tasks with confidence and ease.