ASSEMBLY

WARNING

To reduce the risk of serious injury, do not operate this machine if any parts are damaged or missing. Replace the parts before use.

WARNING

Do not attempt to modify this machine or use accessories not recommended for use with this machine. Any alteration or modification is misuse and could result in a hazardous condition leading to serious personal injury.

UNPACKING

This product requires assembly.

1.Carefully cut the box down the sides then remove the machine and any accessories from the box. Make sure that all items listed in the packing list are included.

NOTE: This machine is heavy and requires a mini- mum of two people to lift. To avoid back injury, lift with your legs and not your back.

2.Inspect the machine carefully to make sure no break- age or damage occurred during shipping.

3.Do not discard packing material until you have care- fullyinspectedandsatisfactorilyoperatedthemachine.

4.Grasp the handle on top of the machine frame. Pull the handle up and back until it locks in place.

5.If any parts are damaged or missing, please call 1-800-729-3878 (1-800-SAWDUST) for assistance.

PACKING LIST

Pressure Washer

50 ft. High Pressure Hose Spray Wand Assembly (upper) Spray Wand Extension (lower) Wand Storage Holster Quick-Connect Nozzle (5) Nozzle Cleaning Tool Injection Hose

Wheel (2)

Flat Washer (2) Axle (2)

Hitch Pin (2) Frame Support (2)

Hex Bolts & Hex Nuts (4-40 mm, 4-25 mm)

(Packing List continued)

4-Cycle Engine Oil (10W30)

Warranty Registration Card Engine Manual Operator’s Manual

NOTE: Do not start the pressure washer until the engine has been filled with oil, all hoses are connected, and the water is turned on. Running this machine without sufficient oil will damage the engine; running this machine without water will damage the high-pressure pump.

ATTACHING THE WHEEL ASSEMBLY

See Figure 2.

To attach the wheels to the pressure washer base:

1.Locate the axle, flat washers, hitch pins, and wheels. Remove the hitch pin from the axle.

2.Slide the axle through the hole in the center of the wheel then slide a washer over the axle.

3.Lift the machine and slide the axle/wheel/washer combination into the wheel mounting hole in the machine base as shown.

4.Push the hitch pin into the hole on the end of the axle to secure the wheel assembly.

NOTE: The hitch pin should be pushed into the axle until the center of the pin rests on top of the axle.

5.Repeat with the second wheel.

Fig. 2

WASHER

AXLE

HITCH PIN

page 8

Page 7 Page 9
Page 8
Image 8
Milwaukee 4555-22 manual Unpacking, Packing List, Attaching the Wheel Assembly
Page 7 Page 9

4555-22 specifications

The Milwaukee 4555-22 is a powerful and innovative tool in the landscape of heavy-duty construction and renovation. Designed primarily as a wall cutter, this equipment is built to facilitate quick, precise cuts in a variety of materials, including brick, block, and concrete. One of its most appealing attributes is its formidable 15-amp motor that effortlessly generates a no-load speed of up to 4,100 RPM. This powerful motor not only enhances cutting efficiency but also extends the life of the tool through its robust design.

One of the standout features of the Milwaukee 4555-22 is its innovative adjustable depth control. This allows users to make cuts into materials with depths between 0-3 inches, making it a versatile tool suitable for diverse applications. Furthermore, the tool comes equipped with a lead screw that facilitates consistent depth settings, ensuring that users can achieve the exact depth required for their specific tasks without any guesswork.

The Milwaukee 4555-22 also boasts an ergonomic design, featuring an adjustable rear handle that provides a comfortable grip during operation. This feature is particularly invaluable for prolonged use, as it minimizes user fatigue and enhances overall control. Additionally, the integrated water feed system aids in dust management while cutting, thereby promoting a cleaner working environment and increasing visibility.

The characteristic durability of Milwaukee tools is present in the 4555-22 model. Its reinforced housing and components are engineered to withstand the rigors of heavy use on job sites, ensuring longevity and reliability. Moreover, the tool is designed for easy blade changes, allowing users to switch between blades tailored for different materials efficiently.

Another key technology featured in the Milwaukee 4555-22 is its integrated overload protection system. This feature prevents the motor from overheating during demanding tasks, thus safeguarding the tool and prolonging its operational lifespan.

In conclusion, the Milwaukee 4555-22 combines power, precision, and user-friendly design, making it an essential tool for professionals in construction and renovation. Its advanced features, from adjustable depth controls to integrated overload protection, underscore Milwaukee's commitment to innovation and quality, ensuring that users can tackle their toughest cutting tasks with confidence and ease.
Top Page Image Contents