USER GUIDE
28
From the icons on the right hand side:
Click an icon to select it. To select more than one icon, hold down Shift or Ctrl and
select the desired icons.
Selecting all
To select all:
Choose Edit/Select All.
Control of Receiver DCL monitors
The two monitors connected to a Receiver DCL are controlled completely
independently. Figure 32 shows the two monitors connected to a Receiver DCL.
They are separate and clearly defined as [1] and [2]. Just select the desired port or
icon as you would for any other Receiver. In the topology you can also see the
Receiver connected to the pass-through port.
Pass-through
port for
connecting more
Receivers
Receivers DCL
ports 1 &2
Figure 32 Control of Receiver DCL monitors
Sending commands
Once the desired units are selected send the desired command by pressing the
appropriate Control button. By default all signals (video, audio, serial) are
broadcast.