Troubleshooting 8
CF2002/CF3102 8-15
4Open the front door of the finisher.
5Turn misfeed-clearing dial
clockwise until the removal indicator
is completely blue.
HIf the dial is turned too far, turn it
counterclockwise to adjust it.
HIf the message “Misfeed
detected”. appears, be sure to
perform these steps. If the paper
is pulled out with too much force
without performing these
steps, the finisher may be
damaged.
6Open the upper door of the finisher ,
and then pull out any paper in the
feed section.
7Close the upper door.
8Pull out any paper fed into the
output tray.
CF2002.book Page 15 Friday, June 13, 2003 9:29 AM