Troubleshooting 8
CF2002/CF3102 8-19
4Open the feed guide for the finisher,
and then remove any paper.
5Open the front door of the finisher.
6Turn misfeed-clearing dial
clockwise until the removal indicator
is completely blue.
HIf the dial is turned too far, turn it
counterclockwise to adjust it.
HIf the message “Staple mode
cannot be used.” appears, be
sure to perform these steps. If
the paper is pulled out with too
much force without performing
these steps, the finisher
may be damaged.
7Pull out any paper fed into the
output tray.
CF2002.book Page 19 Friday, June 13, 2003 9:29 AM