Loading Paper 4
CF2002/CF3102 4-17
5Load the paper into the drawer so
that the side of the paper to be
printed onto (the side facing up
when the package was unwrapped)
faces up.
?Has the paper been loaded
correctly?
If the paper is not loaded
correctly, a paper misfeed may
occur.
§Make sure that the paper is not curled when it is loaded.
§Do not load so much paper that the top of the stack is higher than
the mark.
§Special paper cannot be fed from the 2nd drawer or optional pap er
feed units. If you wish to make copies onto special paper, feed it
through the manual bypass tray or the 1st drawer.
§When loading additional paper, remov e any p aper remai ning in the
drawer, place it on the new paper, and then align the paper in the
stack well before loading it into the drawer. If the paper is not
aligned well, a paper misfeed may occur.
§We recommend replenishing the paper only after all of the paper
in the drawer has been used.
6Close the paper drawer.
CF2002.book Page 17 Friday, June 13, 2003 9:29 AM