5312/5324 IP Phones User Guide

To answer Direct Page calls when Handsfree Answerback is disabled:

Phone state before Page arrives:

To answer the Direct Page (indicated by single burst of tone):

Phone is idle and MUTE is OFF.

1.

Check that MUTE is ON solid.

 

2.

Lift the handset OR press MUTE key to answer in

 

 

Handsfree mode. (The light turns OFF.)

 

3.

Begin speaking.

You are on a handset call or headset

1.

Check that MUTE is flashing.

call, and MUTE is OFF

2.

Press MUTE. The light turns ON solid and you are

 

 

now speaking to the paging party and have MUTED

 

 

your handset/headset call.

 

3.

Speak to the paging party. Press MUTE to alternate

 

 

between handset and handsfree calls.

You are on a MUTED handset/headset

The party paging you receives a busy tone. Handsfree

call, OR, you are on a Handsfree call

Answerback does not interrupt your call.

 

 

 

To end a Direct Page call, do one of the following:

Hang up the handset to end a handset call.

Press (SPEAKER) to end a Handsfree call.

Press (CANCEL).

Note: When the Handsfree Direct Page call ends, the MUTE key light returns to the state it was in before the call was established.

Direct Voice Call

Direct Voice Call feature allows you to establish a two-way handsfree call at another extension whether or not it has Handsfree Answerback or Auto-Answer turned on. Only extensions programmed by the system administrator to receive Direct Voice Calls can be called using this feature.

To make a Direct Voice Call:

1.Lift handset.

2.Dial *93.

3.Dial the extension you want.

4.Speak to called party.

Timed Reminder (5324 IP Phone only)

To program a Reminder:

1. Press (MENU).

- 29 -

Page 37
Image 37
Mitel 5312 Direct Voice Call, Timed Reminder 5324 IP Phone only, To end a Direct Page call, do one of the following