5312/5324 IP Phones User Guide
Adjust the Conference Unit Volume
•Press Volume Up or Volume Down key on the mouse.
Place the Conference Unit in Presentation mode
Presentation Mode is used when only one individual is speaking to a group. If another member in the group wishes to speak, you must disable Presentation Mode. Presentation Mode minimizes extraneous noise.
To place the conference unit in Presentation mode
•Press Presentation Mode key on the mouse.
Mute the Conference Unit
To mute the conference unit so that conversation in the meeting room cannot be heard by individuals being conferenced:
•Press the Mute button on the mouse or 
(MUTE) on the phone.
Exit the Conference
•Press Power key on the mouse.
Using the 5310 Conference Unit without a Mouse
Use the procedures below if you 5310 Conference Unit does not have a mouse attached. The 5324 IP Phone will activate the 5310 Conference Saucer when it detects that the Conference Module has been installed in the back of the phone.
Start a Conference
•Press SPEAKER key 
or just start dialing.
Adjust the Conference Unit Volume
•Press Volume Up or Volume Down.
Mute the Conference Unit
To mute the conference unit so that conversation in the meeting room cannot be heard by individuals being conferenced:
•Press 
(MUTE) on the phone.
Exit the Conference
•Hang up.
- 42 -
