5312/5324 IP Phones User Guide

6.At the prompt "Enter new PIN", enter your new PIN.

Use left arrow key to correct mistakes. The PIN can include digits from 0 to 9 only and can be from 0 to 8 characters in length.

7.Press Enter.

8.At the prompt to verify the PIN, re-enter your new PIN again. The set confirms successful or failed completion.

9.Press (MENU) to end the Menu session.

Trunk Flash

The Trunk Flash feature allows you to access Centrex features (if available) while you are talking on an outside call.

To flash a trunk while talking on an outside call:

1.Press (TRANS/CONF).

2.Dial the appropriate feature access code for a single flash or a double flash.

3.Wait for dial tone.

4.Dial the Centrex feature access code.

Record a Call

This feature uses your voice mail system to record your telephone conversations. Note: You may be required by law to inform the other party that you are recording the conversation. For specific instructions, consult your system administrator.

To start recording while on a 2–party call:

Press the Record Call key. (See Feature Keys elsewhere in this guide for instructions on programming a Record Call key to your phone.)

Note: Your system may be programmed to automatically begin recording external calls when you or the other answers.

To control recording on a 5312 IP Phone, do one or all of the following:

To stop and save a recording, press the Record Call feature key.

To stop and erase a recording, press (CANCEL).

To control recording on a 5324 IP Phone, do one or all of the following:

To pause recording, press the Pause softkey.

To resume recording after pausing, press the Resume softkey.

To stop a recording without saving it, press the Erase softkey or (CANCEL).

- 34 -

Page 42
Image 42
Mitel 5312 manual do utilizador Trunk Flash, Record a Call, To flash a trunk while talking on an outside call