7

Wall-Mounting

To order a wall-mount kit, please contact Peer- less Industries, Inc. at (800) 473-3753 or visit www.peerlessmounts.com. Order wall-mount kit model ST650.

To order a wall-mount kit from Mitsubishi Digital Elec- tronics America, Inc., please visit www.mitsuparts.com or call (800) 553-7278.

Complete installation instructions are included with the kit.

Stand Removal Prior to Wall-Mounting

CAUTION

At least TWO PEOPLE are needed to safely remove the stand. Have one person hold the TV while the other person removes the stand. Failure to follow these recommendations may result in personal injury and damage to the product.

Note

55-inch TV: Remove the factory-installed stand prior to wall-mounting.

40- or 46-inch TV: If you installed the stand for table-top use, follow these instructions to remove it prior to wall-mounting the TV.

1.Disconnect the TV’s AC power cord from the AC power outlet.

2.Spread the protective sheet that was wrapped around the TV on a flat, even surface, such as a sturdy table. The protective sheet will help prevent damage to the display.

IMPORTANT: To avoid damaging the screen, make sure there are no foreign objects under or on top of the protective sheet.

3.Position one person on each side of the TV (left and right sides). Have each person firmly grasp their side of the TV and gently place it face down on the pro- tective sheet with the display stand hanging over the edge of the table. See the illustration to the right.

4.Use a magnetic philips screwdriver to remove the stand screws from the recessed holes (see illustra- tion to right). Note: A regular screwdriver can be used with a separate magnetic pick-up tool.

5.While one person holds the TV with both hands, have the other person grasp the stand (see illustra- tion to the right) and remove the stand by pulling it away from the TV in the direction of the large arrow shown in both illustrations.

574UBOE

1SPUFDUJWF TIFFU

5BCMF

55-inch TVs

 

40- and 46-inch TVs

 

(6 screws)

 

(4 screws)

 

 

 

Protective

Sheet

Pull stand to remove.

For assistance call 1(800) 332-2119

Page 7
Image 7
Mitsubishi Electronics 154 manual Stand Removal Prior to Wall-Mounting