11
4-2-2 M-NET Setting
In M-NET Setting, set the AG-150A M-NET address, whether or not a K-Control unit is present and which
machines send the prohibited controller command.
(1) Enter the AG-150A M-NET address in the [M-NET Addres s] field. Normally you should enter [0].
(2) When K-Control air conditioners are connected, c lick [Used] in the [K-Control Un its] field and enter the
M-NET address of K transmission converter in the [K Con verter Address] field.
(3) If prohibited controller (prohibiting local operatio n) has been set, this setting determ ines the scope of this
setting s control, i.e. operation is prohibited for both the remote contr ol and subordinate system controllers,
or just for the remote control. Click [SC/RC] when you want prohibited controllers to include both
subordinate system controllers and the remote control, or click [RC only] when you only want to proh ibit
operation on the remote control.
Note: Normally, you should select [SC/RC].
4-2-3 Network Setting
In Network Setting, set the AG-150A IP address, subnet m ask and gateway address. If connecting to the
AG-150A via a permanent LAN, consult with the net work administrator before setting these addresses.