Mitsubishi Electronics AG-150A 4-4 Interlocked Setting

18

4-4 Interlocked Setting

To interlock the operation of LOSSNAY with the run/stop sta tus of the indoor units, click on [Initial

Settings]-[Interlocked LOSSNAY] in the menu to bring up the Interlocked LO SSNAY screen, and enter the

interlock conditions. Click [Save Settings] to send sett ing data to the AG-150A.

Note: If the user logs in as a building manager, the operations may be prohibited.

Note: If the system is connected to the TG-2000A, make all settings and changes from the TG-2000A so that the data in

TG-2000A and AG-150A will match.

(1) Click in the Interlocked LOSSNAY registration fie ld to displa y the

[Select Unit Addresses] screen, and click on the numbers

corresponding to the units to be registered. The ones that are

selected will be shown with a yellow-green background. To cancel

the selection, click on them again. Deselected items will be shown

with a gray background.

(2) Click on the Interlocked Indoor Unit Registration field to displa y

the [Select Unit Address] for the indoor units, and c lick on the

numbers corresponding to the units to be registere d. The ones

that are selected will be shown with a yellow-green background.

To cancel the selection, click on them again. Deselected items will

be shown with a gray background.

Note: A maximum of 16 indoor units can be registered to operate with

one ventilator.

Interlocked LOSSNA

Y

Registration

Register the interlocked

ventilation equipment here.

Click to bring up the registration

screen.

Interlocked Indoor Units

Registration

Register the indoor units to

which LOSSNAY units are

interlocked here. Click to bring

up the registration screen.

Refresh

Read setting data from AG-150A. Save Settings

Send setting data to AG-150A.

Contents

Main Air-conditioner Network System Centralized Controller Model: AG-150A operation. Keep this manual for future reference. (Web browser for Initial Settings) 1 Introduction .........................................................................1 2 Setting the Operating Env ironment......................................2 1 Introduction 1-1 Conventions Used in This Manual 1-2 Computer Requirements 1-3 Notes on using AG-150A with the integrated centralized control software (TG-2000A) 2 Setting the Operating Environment 2-1 Setting the PC IP Address Page 2-2 Setting the Web Browser 2-2-1 Not connecting to the Internet 2-2-2 Connecting to the Internet using a dial-up connection 2-2-3 Connecting to the Internet using a proxy server (Using an existing LAN) 3 Performing Operations 3-1 Logging in on the AG-150A 3-1-1 Logging in on the AG-150A http:// [IP address of the AG-150A]/g-50 /administrator.html 3-1-2 Encrypting the communication data and login on the AG-150A /administrator.html Page 4 Initial Settings 4-1 Setting the Current Date and Time 4-2 Setting the Basic Information and External Input Functions 4-2-1 AG-150A Unit Setting 4-2-2 M-NET Setting 4-2-3 Network Setting 4-2-3-1 Settings for when the AG-150A is connected to a dedicated LAN 4-2-3-2 Settings for when the AG-150A is connected to an existing LAN 4-2-4 External Input Setting Page 4-2-5 Setting the Display Format 4-3 Group Setting 4-3-1 Setting the Group Name 4-3-2 Registering air conditioner or hot water supply units in the group 4-3-3 Registering general equipment in the group 4-4 Interlocked Setting 4-5 Block Setting 4-5-1 Registering a block name 4-5-2 Registering a group in a block 5 Functions 1 5-1 Error mail reports/E-mail communication 5-1-1 Entering the E-Mail Information for the AG-150A 5-1-2 Setting the Mail Server Information 5-1-3 Setting the Error Mail Destinations 5-1-4 Setting the Addresses of the Recipient 5-1-5 Mail format 5-2 Energy-Save Control and Peak Cut Control 5-2-1 When Demand Controller Method is used 5-2-2 When Electric Amount Count PLC Method (Amount Count Software) is used 5-2-3 When PI Controller Method is used 5-2-4 When Remote AG-150A Method is used 5-2-5 When From external system Method is used 5-2-6 Setting the Outdoor Unit Control Method (All methods) 5-2-7 Setting the Indoor Unit Control Method (All methods) 5-3 Settings for measurement 5-3-1 Registering AI controllers for temperature/humidity sensors 5-3-2 Adjusting the measured temperature/humidity values 5-3-3 Registering PI controllers for measurement by meters 5-3-4 Setting the trend data format 5-3-5 Setting the destination to which an error mail is sent 5-3-6 Setting the destination to which temperature/humid trend data mail is sent 6 Functions 2 6-1 Limiting the Set Temperature Operating Range 6-2 Night Mode Schedule 6-3 System-Changeover of Y series 7 Functions 3 7-1 External Temperature Interlock 7-2 Night setback control 8 User Setting Page 9 Registering a License for Optional Function