Mitsubishi Electronics AG-150A 5-2 Energy-Save Control and Peak Cut Control

23

5-2 Energy-Save Control and Peak Cut Control

Click on [Functions 1] – [Peak Cut] in the menu to bring up the peak cut control sc reen, and mak e necessar y

peak cut settings to use the energy-save or peak cut control function.

Click [Save Settings] to send setting data to the AG-150A.

Note: Run the test run mode, and check that the equipment related to peak cut is connected properly to perform peak cut control.

(It is possible to perform control compulsorily by changing the control level.)

Note: The use of energy-save/peak cut control functions requires a separate license registration.

Confirm on the license registration screen (Ch8) that the license registration has been completed.

Note: If the user logs in as a building manager, some of the operations may be prohibited.

To enable peak cut, register the "Energy Saving (Peak Cut) " license to all AG-150A, and s et the peak cut

method and the indoor/outdoor units control method s. When the license is registered, the control can be

performed in 5 degrees (Level 0-4).

To enable energy saving control at the constant rate, register the "En ergy Saving" license to all AG-150A,

and set the level to "0" in [Indoor/Outdoor unit con trol method] section.

Save Settings

Send setting data to AG-150A

and PLC.

Refresh

Read setting data from

AG-150A and PLC.

Peak cut method

Select the peak cut method. Setting details

Set the details of the selected

method.

Indoor unit control method

Set the indoor unit control

method.

Outdoor unit control

method

Set the outdoor unit control

method.

AG-150A

Demand Controller Method

PI Controller

Up to 3 AG-150A can be

connected.

Up to 10 AG-150A can be connected.

PLC (with Electric

Amount Count Software) Pulse-method

watt-hour meter

AG-150A

Pulse

Electric Amount Count PLC Method

Demand level

report

PLC (with Electric

A

mount Count Software) Demand

Controller

Demand level

contact input

Pulse

Pulse

Notify the

control level

PLC etc

PI Controller Method

AG-150A

From external system Method

Remote AG-150A Method

Pulse-method

watt-hour meter

Pulse-method

watt-hour meter

Monitors electric

power

Monitors electric

power

Monitors

control level

AG-150A

Contents

Main Air-conditioner Network System Centralized Controller Model: AG-150A operation. Keep this manual for future reference. (Web browser for Initial Settings) 1 Introduction .........................................................................1 2 Setting the Operating Env ironment......................................2 1 Introduction 1-1 Conventions Used in This Manual 1-2 Computer Requirements 1-3 Notes on using AG-150A with the integrated centralized control software (TG-2000A) 2 Setting the Operating Environment 2-1 Setting the PC IP Address Page 2-2 Setting the Web Browser 2-2-1 Not connecting to the Internet 2-2-2 Connecting to the Internet using a dial-up connection 2-2-3 Connecting to the Internet using a proxy server (Using an existing LAN) 3 Performing Operations 3-1 Logging in on the AG-150A 3-1-1 Logging in on the AG-150A http:// [IP address of the AG-150A]/g-50 /administrator.html 3-1-2 Encrypting the communication data and login on the AG-150A /administrator.html Page 4 Initial Settings 4-1 Setting the Current Date and Time 4-2 Setting the Basic Information and External Input Functions 4-2-1 AG-150A Unit Setting 4-2-2 M-NET Setting 4-2-3 Network Setting 4-2-3-1 Settings for when the AG-150A is connected to a dedicated LAN 4-2-3-2 Settings for when the AG-150A is connected to an existing LAN 4-2-4 External Input Setting Page 4-2-5 Setting the Display Format 4-3 Group Setting 4-3-1 Setting the Group Name 4-3-2 Registering air conditioner or hot water supply units in the group 4-3-3 Registering general equipment in the group 4-4 Interlocked Setting 4-5 Block Setting 4-5-1 Registering a block name 4-5-2 Registering a group in a block 5 Functions 1 5-1 Error mail reports/E-mail communication 5-1-1 Entering the E-Mail Information for the AG-150A 5-1-2 Setting the Mail Server Information 5-1-3 Setting the Error Mail Destinations 5-1-4 Setting the Addresses of the Recipient 5-1-5 Mail format 5-2 Energy-Save Control and Peak Cut Control 5-2-1 When Demand Controller Method is used 5-2-2 When Electric Amount Count PLC Method (Amount Count Software) is used 5-2-3 When PI Controller Method is used 5-2-4 When Remote AG-150A Method is used 5-2-5 When From external system Method is used 5-2-6 Setting the Outdoor Unit Control Method (All methods) 5-2-7 Setting the Indoor Unit Control Method (All methods) 5-3 Settings for measurement 5-3-1 Registering AI controllers for temperature/humidity sensors 5-3-2 Adjusting the measured temperature/humidity values 5-3-3 Registering PI controllers for measurement by meters 5-3-4 Setting the trend data format 5-3-5 Setting the destination to which an error mail is sent 5-3-6 Setting the destination to which temperature/humid trend data mail is sent 6 Functions 2 6-1 Limiting the Set Temperature Operating Range 6-2 Night Mode Schedule 6-3 System-Changeover of Y series 7 Functions 3 7-1 External Temperature Interlock 7-2 Night setback control 8 User Setting Page 9 Registering a License for Optional Function