Mitsubishi Electronics AG-150A 5 Functions 1

20

5 Functions 1

5-1 Error mail reports/E-mail communication

Click on [Functions 1] – [E-Mail] in the menu to open the [E-mail] window and make necessary settings to

perform remote monitoring via mail, using error m ail report or the maintenance tool.

Click [Save Settings] to send setting data to the AG-150A.

Note: The use of the error mail report function requires a separate license registration.

Confirm on the license registration screen (Ch8) that the license registration has been completed.

Note: If the user logs in as a building manager, the operations may be prohibited.

5-1-1 Entering the E-Mail Information for the AG-150A

Enter the E-mail information provided by either the ISP or the

LAN administrator.

Note: When sending E-mail via an ISP, a user contract with the ISP is

required.

Make necessary settings based on the functions that ar e to be used, using the table below as a reference.

Table 5-1 Items that Require Settings to Be Made (E-Mai l Settings of AG-150A)

Error Mail Report Mail Communication

Functions

Items No SMTP

Authentication Uses SMTP

Authentication No SMTP

Authentication Uses SMTP

Authentication

Mail Address V V V V

User ID V V V

Password V V V

Interval of checking incoming

mails V V

Save Settings

Send setting data to AG-150A.

Refresh

Read setting data from AG-150A.

E-Mail settings of AG-150A

The E-mail settings o

f

AG-150A are set here.

Mail Server Information

Set the mail server/DNS serve

r

information here.

Mail Communication

Setting

Set the address of the mail

recipients here.

Error Mail Settings

Set the error mail destination

here.

Contents

Main Air-conditioner Network System Centralized Controller Model: AG-150A operation. Keep this manual for future reference. (Web browser for Initial Settings) 1 Introduction .........................................................................1 2 Setting the Operating Env ironment......................................2 1 Introduction 1-1 Conventions Used in This Manual 1-2 Computer Requirements 1-3 Notes on using AG-150A with the integrated centralized control software (TG-2000A) 2 Setting the Operating Environment 2-1 Setting the PC IP Address Page 2-2 Setting the Web Browser 2-2-1 Not connecting to the Internet 2-2-2 Connecting to the Internet using a dial-up connection 2-2-3 Connecting to the Internet using a proxy server (Using an existing LAN) 3 Performing Operations 3-1 Logging in on the AG-150A 3-1-1 Logging in on the AG-150A http:// [IP address of the AG-150A]/g-50 /administrator.html 3-1-2 Encrypting the communication data and login on the AG-150A /administrator.html Page 4 Initial Settings 4-1 Setting the Current Date and Time 4-2 Setting the Basic Information and External Input Functions 4-2-1 AG-150A Unit Setting 4-2-2 M-NET Setting 4-2-3 Network Setting 4-2-3-1 Settings for when the AG-150A is connected to a dedicated LAN 4-2-3-2 Settings for when the AG-150A is connected to an existing LAN 4-2-4 External Input Setting Page 4-2-5 Setting the Display Format 4-3 Group Setting 4-3-1 Setting the Group Name 4-3-2 Registering air conditioner or hot water supply units in the group 4-3-3 Registering general equipment in the group 4-4 Interlocked Setting 4-5 Block Setting 4-5-1 Registering a block name 4-5-2 Registering a group in a block 5 Functions 1 5-1 Error mail reports/E-mail communication 5-1-1 Entering the E-Mail Information for the AG-150A 5-1-2 Setting the Mail Server Information 5-1-3 Setting the Error Mail Destinations 5-1-4 Setting the Addresses of the Recipient 5-1-5 Mail format 5-2 Energy-Save Control and Peak Cut Control 5-2-1 When Demand Controller Method is used 5-2-2 When Electric Amount Count PLC Method (Amount Count Software) is used 5-2-3 When PI Controller Method is used 5-2-4 When Remote AG-150A Method is used 5-2-5 When From external system Method is used 5-2-6 Setting the Outdoor Unit Control Method (All methods) 5-2-7 Setting the Indoor Unit Control Method (All methods) 5-3 Settings for measurement 5-3-1 Registering AI controllers for temperature/humidity sensors 5-3-2 Adjusting the measured temperature/humidity values 5-3-3 Registering PI controllers for measurement by meters 5-3-4 Setting the trend data format 5-3-5 Setting the destination to which an error mail is sent 5-3-6 Setting the destination to which temperature/humid trend data mail is sent 6 Functions 2 6-1 Limiting the Set Temperature Operating Range 6-2 Night Mode Schedule 6-3 System-Changeover of Y series 7 Functions 3 7-1 External Temperature Interlock 7-2 Night setback control 8 User Setting Page 9 Registering a License for Optional Function