142. TV Setup
Initial TV Setup, continued
Change the Menu Language
Choose to display
Select a menu language in the Setup menu.
1. With the Setup menu displayed, press to high- light the Language icon.
2.Press
to highlight either English or Spanish.
3.Press MENU to return the highlight to the top row of icons.
Memorize Channels (Channel Scan)
For ANT 1/MAIN and ANT 2/AUX
Start a channel scan (memorization) from the Setup menu.
Note: If using a CableCARD, the TV will automatically acquire the complete list of available channels from the service provider. Perform channel memorization for ANT 1 CableCARD service only if you need to reacquire the channel list.
To start channel memorization
1. With the Setup menu displayed, press to high- light the Scan icon.
2.Press
to highlight an input selection based on your connections:
Input | Condition |
|
|
Ant 1 Air | When connected to an indoor or |
Ant 2 Air | outdoor antenna |
|
|
Ant 1 Cable | When connected to direct cable (no |
Ant 2 Cable | cable box) |
|
|
3. Press to highlight the
4.Press ENTER to start automatic channel memoriza- tion.
To stop channel memorization before completion, press CANCEL.
5.When memorization is complete you can:
•Press MENU once to return to the top row of icons.
•Press MENU again to return to the Main menu.
•Press EXIT to watch TV.
After channels have been memorized:
• To tune to memorized channels, press CH / while watching TV on the ANT 1 or ANT 2 inputs.
•Use the Setup > Edit menu for additional channel options, such as adding or deleting channels from memory, naming channels, and saving favorite channels in custom memory banks.
Additional TV Setup Using the Setup Menu
See chapter 5, “TV Menu Settings,” to:
•Edit channel options
•Set the TV clock
•Set the TV Timer
•Select an Energy Mode to manage power use while the TV is off.
Setting Up TV Inputs
When You First Connect a Device
This TV’s Easy Connect™ Auto Input Sensing feature detects most connections automatically. When you first connect a device, the TV will:
a.detect the connected device and automatically switch to it
b.prompt you to identify the device type
c.prompt you to perform NetCommand
d.repeat these steps for any additional newly detected devices
The tables below state which connections trigger Auto Input Sensing.
Auto Detection Active |
| No Auto Detection |
INPUT video jacks |
| ANT 1 and ANT 2 |
|
|
|
COMPONENT video jacks |
|
|
|
|
|
HDMI * |
|
|
Digital Audio Out |
|
|
AVR AUDIO OUTPUT, right (red) analog audio jack only
USB (USB photo port on side)
*If the device is powered off when connected, detec- tion occurs when the device is next powered on.
Note: For connection and setup of a personal com- puter, see the information later in this chapter.
