223. TV Connections
Direct Cable (no cable box)
(can be used with a CableCARD™)
You must connect the incoming cable for your primary viewing source to ANT 1/MAIN, especially for CableCARD™ use.
1.Connect the primary incoming coaxial lead cable to ANT 1/MAIN on the TV back panel.
2.For an optional secondary antenna source, connect an antenna (or cable) to ANT 2/AUX.
3.If you have subscribed to a CableCARD service,
Insert the CableCARD into the "/5CableCARD"69slot.
"/5."*/
CFMPXMBCFMXJUIJOSFDFTTFEBSFBBUUPQ
57#BDL1BOFM
Figure 4. Connection for direct cable service
Antennas with Separate UHF and VHF Leads
Required: UHF/VHF combiner
1.Connect the UHF and VHF antenna leads to the UHF/VHF combiner.
2.Push the combiner onto ANT 1/MAIN on the TV back panel.
6)'"OUFOOB
$IBOOFMT 
"/5."*/ 
| |||
|
| CFMPXMBCFMXJUIJOSFDFTTFEBSFBBUUPQ | |
7)'"OUFOOB | 57#BDL1BOFM |
| |
$IBOOFMT |
| ||
&YUFSOBM |
|
|
|
"OUFOOB | 0INUP |
| |
PS$BCMF | 0IN |
|
|
| $PNCJOFS |
| |
| 6)' |
|
|
| 7)' | 5P"/5."*/ | |
|
|
| |
#BDL | 4JEF |
| |
| 7JFX |
| |
|
| 7JFX |
|
Figure 5. Connecting separate UHF and VHF Antennas
Antenna with a Single Lead
A.For an antenna with flat twin leads Required:
A1. For an antenna with flat twin leads, connect the
A2. Push the
B.For cable or antenna with coaxial lead Connect the coaxial lead directly to ANT 1 on the TV back panel.
"/5."*/
CFMPXMBCFMXJUIJOSFDFTTFEBSFBBUUPQ
0IN 57#BDL1BOFM $PBYJBM
$BCMF
0IN
'MBU# 
"
" 0QUJPOBM0INUP0IN
.BUDIJOH5SBOTGPSNFS
Figure 6. Connecting a Single Antenna Lead
Mitsubishi strongly recommends you avoid using antennas with flat twin leads. Flat twin lead antenna wires are subject to interference which may adversely affect the performance of the TV. We recommend using coaxial antenna cable.
