1. Television Overview
NetCommand for HDMI Devices
Some newer HDMI devices may be compatible with the TV’s NetCommand for HDMI feature. Compatible devices can receive control signals through the HDMI connection. The TV’s remote control may be able to operate some functions of these devices without any further setup.
TV Front Panel
Indicator Lights
Lights (located on the front left) indicate whether the TV is on or off, a timer is set, and the overall functional status of the TV. See chapter 4, “TV Operation and Features,” for more information.
Swivelling Stand
The included stand allows the TV to be manually swiv- |
|
|
| Side Panel |
|
|
| ||
|
|
| ||
|
|
| (Controls and | |
eled up to 30 degrees left or right to the best viewing |
|
|
| |
|
|
| Inputs) | |
angle. |
|
|
| |
|
|
| Remote | |
|
|
|
|
TV Guide Daily Interactive Program Guide |
|
|
| Control IR | ||||||||||
TV Guide Daily is a |
|
|
| Sensors | ||||||||||
|
|
|
| |||||||||||
| lists regular, digital, and |
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| |||||
| being broadcast in your area over the next | Decorative Blue Light (see options in | ||||||||||||
| hours. |
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| the AV > Global > Blue Glow menu) | ||||
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
| Power and Status Indicators | |||||||||
| Off | Steady On | Slow Blinking | Fast Blinking |
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER/TIMER Indicator |
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| LED Color | TV Condition |
| Additional Information |
|
|
|
| ||||||
| None | Standby condition. |
| Normal operation. |
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Blue | TV is powered on. |
| Normal operation. |
|
|
|
| ||||||
| Blue | TV powered off, | Normal operation. TV can be turned on at any time. | |||||||||||
| set. |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Blue | 1. TV just plugged into AC outlet. |
2.AC just restored after power failure.
3.TV rebooting after System Reset used.
4.TV rebooting after power fluc- tuation or receiving abnormal digital signals from a digital channel or digital device.
5.You have begun the procedure to update software from an authorized flash memory device.
Wait approximately one minute for blinking to stop before turning on. Normal operation.
STATUS Indicator
LED Color | TV Condition | Additional Information |
None | Normal TV on or standby condition. | Normal operation. |
|
|
|
Red | TV may require service. | Turn off the TV and unplug the set from the AC power source. |
| Wait one minute and then plug the set back in. See Appendix E. | |
|
| |
|
| If the LED is still on, contact your dealer or a Mitsubishi |
|
| Authorized Service Center. Go to |
|
|
