3. TV Connections | 25 |
VCR to a Cable Box (Audio & Video)
Required: Two coaxial cables, right and left audio cables,
1.Connect the incoming coaxial cable to CABLE IN on the cable box.
2.Connect one coaxial cable from OUT on the cable box to ANTENNA IN on the VCR back panel.
3.Connect the cable box outputs to the TV as shown in one of the options listed below. This connection allows the TV to receive the best available signal directly from the cable box. See the referenced figures in this chapter, “TV Connections.”
Option 1 (see Figure 1: Component video output to the TV’s COMPONENT INPUTS Y Pb Pr jacks; analog stereo audio to the associated AUDIO jacks.
OR
Option 2 (see Figure 2): HDMI output to the TV’s HDMI jack.
OR
Option 3 (see Figure 3):
4.To use the TV speakers with the VCR, connect left (white) and right (red) audio cables from AUDIO OUT on the VCR to INPUT AUDIO L (MONO) and AUDIO R on the TV back panel #1. If your VCR is mono (non- stereo), connect only the white (left) cable.
5.Connect either an
Note: When using this connection configuration with the connections used in step 3, it is possible to view live cable programs through the VCR De- vice. For best picture quality, however, always view live cable programs directly from the cable box device.
: 
1C
1S | 47*%&0 |
- | "6%*0 |
| |
3 |
|
|
*/
57#BDL1BOFM
34
"UUBDIPOMZPOFUZQFPG |
|
| |
WJEFPDBCMF47JEFP | |||
SFDPNNFOEFEJGBWBJMBCMF | |||
|
| ||
| 065 | ||
|
|
*ODPNJOH $BCMF
065
| */ |
|
| - | 3 |
|
|
| |||
065 | 065 */ | 065 */ | */ |
| |
| 47*%&0 | 7*%&0 | 3 | ||
| "/5&//" | ||||
|
|
| "6%*0 |
|
