Mitsubishi Electronics LT-46244, LT-52244 manual Inputs Menu Options, Vcr, Pc, Avr

465. TV Menu Settings

Inputs Menu

Note:

When you change an input name in the Name menu and then exit the Name menu:

The name is changed

The icon in the Input Selection menu is changed

Audio and video settings are changed to the defaults for the new device type.

All NetCommand “learning” for the input is also erased.

Change input names using the Inputs > Name menu.

Inputs Menu Options

Cable Box,

Camcorder, Name DVD, DVD2,

DVR, Game, HD

Disc, Satellite,

VCR, PC

On/Off (Ant 1 and 2 only)

Off (HDMI only)

•Assign or change names of inputs appearing in the Input Selection menu.

•Turn Ant-1 and Ant-2 On or Off.

•Turn unused HDMI inputs Off.

•Press to move between inputs.

•Press to select a name.

•If you change the name of an input after performing NetCommand “learning,” the IR codes you “learned” are erased.

Note: When you disconnect an HDMI device, the icon remains in the Input Selection menu until you remove it. To remove an unwanted HDMI icon, select Off for the HDMI input.

	Put frequently used icons at the start of the Input Selection menu.
Order	1.	Press	to highlight the icon to move.
	2.	Press	ENTER to confirm the selection.

3.Press to drag the icon to the desired position.

4.Press ENTER to set the new position.

• Perform initial set-up of NetCommand control of a device.

• Add or remove individual keys from NetCommand control of a device.

Learn	See detailed instructions in chapter 6, “NetCommand.”
	Set up NetCommand control of an A/V receiver. This set-up allows you to:
AVR	• Operate the A/V receiver’s power and volume functions with the TV’s remote control.
	• Make the A/V receiver switch automatically to the correct audio input when you select a
	device in the TV’s Input Selection menu.
	See detailed instructions in chapter 6, “NetCommand.”
	Guide	On/Off	Enable/disable or set up TV Guide Daily. See instruc-
			tions on the following page.
Guide	Devices	Ant-1, Ant-2
	Zip Code	[5-digit ZIP code]