Mitsubishi Electronics LT-46244, LT-52244 manual Inside the Guide, Outside the Guide

566. NetCommand

Operating NetCommand-Controlled Devices, continued

Key Name in	Special Operation Description and Setup	How to Use
Learning Screen
Guide	Displaying the Disc Menu (DVD or high-defini-	While watching the device, press GUIDE to display
	tion disc format)	the disc menu.
	“Learn” the Disc Menu, Top Menu, or other key as
	named on the original remote in the Guide
	learning position.

Displaying the On-Screen Program Guide (cable box or satellite receiver)

1.“Learn” the Guide key on the original remote in the Guide learning position.

1.While watching the device, press GUIDE to display the guide.

2.Press CH/PAGE  / to send the Page Up/Dn commands for the guide.

	2.	Learn the PAGE	and PAGE	keys of the
		original remote in the Page Up and Page Dn
		learning positions.
Page Up	Using Page Up/Down				Inside the Guide
Page Dn	If the device’s original remote control has separate				Press CH/PAGE	/	to send the Page Up/Dn
	keys for Channel Up/Dn and Page Up/Dn, the				commands.
	TV remote control’s CH/PAGE  /			key can work	Outside the Guide
	like the two separate keys.
					Press CH/PAGE	/	to send the Channel Up/Dn
	1.	“Learn” CHANNEL	/ in the Channel Up/Dn
					signal.
		positions.
	2.	“Learn” PAGE /	in the Page Up/Dn posi-
		tions.
Enter	Enter Functions (cable boxes, satellite receivers, etc.)
	Some devices have two keys that have “enter” functions. One key is for menus and is often labelled
	SELECT or OK. A second key is for use with number keys for direct channel selection. NetCommand
	uses the same ENTER key for both operations.
	When ENTER has a menu or guide function or when				1. Press MENU or GUIDE to display the device’s
	the original remote control uses the same key for				menu or guide.
	menus and channel selection:				2. Press ENTER within the menu and
	Learn the ENTER, SELECT, or OK key in the				NetCommand will send the Enter signal for
	NetCommand Enter learning position.				menus.
Enter (digits)	When ENTER is for channel changes (i.e., the original				Press digit key(s) and then press ENTER.
	remote control has a separate ENTER key for this				NetCommand will send the Enter signal for
	function):				channel selection.

Learn the ENTER key for channel selection in the NetCommand Enter (digits) learning position. Use this learning position only if the original remote control has separate keys for Enter in menus and Enter for channel selection.

Cancel	CANCEL as the Cancel or Exit Function	1. Press MENU or GUIDE to display the menu or
	“Learn” the Cancel or Exit function in the	guide.
	NetCommand Cancel learning position	—
		2. Press CANCEL and NetCommand will send the
		Cancel or Exit signal.

—The symbol “—” can serve as the separator

(separator) between a digital channel’s main and sub- channel digits, e.g., digital channel 12-1 (main channel is 12, sub-channel is 1).

“Learn” the channel separator function in the NetCommand – (separator) learning position.

Press digit key(s) and press — .

CANCEL

NetCommand will send the channel-separator signal.