Mitsubishi Electronics MAM-AM24, MAM-AM6, MAM-GM20, MAM-GM6 Mounting, Modem mounted on the DIN rail

Installation and Mounting Mounting

3.3Mounting

Mount the modem by pushing or snap fitting it onto a DIN rail (top-hat rail 35 mm).

Service

Mitsubishi-
xxxxx
	Xxxxx
	xx		Alarm+
		XX,X
				ModemX
				xxx.xxx
				.X
					XGSM
027954
		541034

Antenna

					COM1	(RS485)
				Bus
			(0V)
				.
	-T	+T		Config
	R-		/485)
R+		(RS422
+	COM2

-

Fig. 3-4:

Pull out the black tab on the device using a screwdriver and so the device can snap fit to the DIN rail. You can remove the device from the rail in the same way. Ensure that the retaining machanism of the modem snaps cleanly and securely into the DIN rail.

027954
541034
						Antenna
		Service
			Process	Line	Data out	Modem Mode
		Power
			SIM-Card		Push
-	+		COM2 (RS232)		COM1 (RS232)

Fig. 3-5:

Modem mounted on the DIN rail

E ATTENTION:

￿ The device must only be used in rooms that are dry and clean. Protect the device from humidity, water splashes or heat.

￿ Do not subject the device to severe vibration.

P DANGER:

￿ The device must not be used in environments containing flammable gases, fumes or dust.

Mitsubishi Alarm Modem 3 - 4