Mitsubishi Electronics MR-G50J-SS-NZ Control panel upper/ lower Duct R upper/ lower, Cover IM

OPERATING PROCEDURE			PHOTOS
Control panel (upper/ lower) Duct R (upper/ lower)	Photo 5
(4)Remove rivet E, and pull out the mirror hinge on the lower left
of the control panel to remove the connector. (See photo 5)
(5)Remove rivet F (two rivets) in the upper left and right side,				Catch
		Catch
screw A (two screws) in the lower left and right side, and rivet

F(two rivets) in the lower. left and right side.

Detach catches (seven places).
(See photo 5)			Rivet F
		Rivet F
(6)Detach catches (six places) on control panel (upper/ lower) and
then duct R (upper/ lower).
	Catch
				Catch
w Control panel can be divided into the upper and lower part by
detaching catches (three places) on control panel (upper/ lower)
	Rivet F
				Rivet F

Control panel assembly

(The assembly consists of the following: Control panel [upper/

Screw A

Screw A

lower], motor damper for refrigerator compartment / slide chilled

Mirror hinge

compartment, refrigerator compartment thermistor, slide chilled

compartment thermistor, room light socket, refrigerator compart-

ment room light, and duct R [upper/ lower]).

Control

Caution on assembly

panel

Rivet E

To prevent poor contact of connectors, connect them properly.

Catches

(lower)

Fix the control panel by inserting the lower catches (two places)

into the floor of refrigerator compartment.

3. Parts inside the ice making compartment, versa compart-

Photo 6

Partition I/ S

ment, vegetable compartment, and freezer compartment ➔

Partition I/ S ➔ Partition I/ S/ V ➔ Cover (IM) ➔ Automatic

Rivet E

Ice maker assembly ➔ Cover (lower) ➔ Partition V/ F ➔

Partition cover

Connector cover (right/ left) ➔ Fan grille ➔ Defrost heater,

Screws C

Drip tray, DEF thermistor

(1)Remove interior parts out of ice making compartment,

Rollers

Rollers

versa compartment, vegetable compartment, and freezer

Partition I/ S/ V

compartment.

(2)To detach them, pull out the doors of ice making

compartment, versa compartment, vegetable

Photo 7

compartment, and freezer compartment.

Partition I/ S

Tank holder

(3)Remove rivet E (one rivet), partition cover, and a connector.

Screws A

Remove screw C (two screws) at the front side of refrigerator

Screws A

and four rollers to pull out the partition.

(See photo 6)

Caution on assembly

Screw D

Partition I/ S/ V

Screw D

Push up the lead wires so that they will not rub partition I/ S.

Partition I/ S/ V	Photo 8
(4)Remove screw A (two screws) at the front of refrigerator.					Catch (Automatic Ice
Remove screw A (one screw each) and screw D (one screw					maker assembly)
		Tank holder
each) at the right and left side of inner wall.
							Automatic Ice
Then lift up the partition.							maker assembly
(See photo 7)
Cover (IM)
				Cover
(5)Remove 2 rivets E and 3 catches in order to detach the cover.
(See photo 8)
									Cover (IM)
Automatic ice maker assembly
(6)Pressing a catch upward, and pull Automatic Ice maker			Rivet E			Catches		Rivet E
assembly to the right side. (See photo 8)						(Cover)

35