103 | Mitsubishi Electronics PURY-P400, P500YMF-C manual

Check Code		Check Content
6606	Communications with transmission processor abnormality
6607	No ACK abnormality
6608	No response abnormality
6831	Abnormal MA communication receiving (No receiving)
6832	Abnormal MA communication receiving (Abnormal cycle recovery)
6833	Abnormal MA communication sending (H/W abnormality)
6834	Abnormal MA communication receiving (Start bit detection abnormality)
7100	Total capacity abnormality
7101	Capacity code abnormality
7102	Connected unit count over
7105	Address setting abnormality
7106	Characteristics setting abnormality
7107	Branch number setting abnormality

7111	Remote control sensor abnormality

7130	Different indoor model connected abnormality
Intermittent fault check code

Trouble Delay Cope		Trouble Delay Content

1202		Preliminary discharge temperature abnormality or preliminary discharge thermal sensor abnormality (TH1)

1205		Preliminary liquid pipe temperature sensor abnormality (TH5)

1211		Preliminary low pressure saturation abnormality or preliminary low pressure saturation sensor abnormality (TH2)

1214		Preliminary THHS sensor/circuit abnormality

1216		Preliminary sub-cool coil outlet thermal sensor abnormality (TH7)

1217		Preliminary sub-cool coil bypass outlet thermal sensor abnormality (TH8)

1219		Preliminary sub-cool coil bypass inlet thermal sensor abnormality (TH9)

1221		Preliminary ambient temperature thermal sensor abnormality (TH6)

1243		Preliminary compressor shell thermal sensor abnormality (TH10)

		Preliminary lacked refrigerant abnormality
		Preliminary lacked refrigerant abnormality

1402		Preliminary high pressure abnormality or preliminary pressure sensor abnormality

1600		Preliminary overcharged refrigerant abnormality

1605		Preliminary suction pressure abnormality

1607		CS circuit block abnormality

		Preliminary IAC sensor/circuit abnormality
4300		Preliminary VDC sensor/circuit abnormality

		Preliminary serial transmission abnormality

4320		Preliminary bus voltage abnormality
4330		Preliminary heat sink overheating abnormality

4340		Preliminary overload protection

4350		Preliminary overcurrent protection
4360		Preliminary cooling fan abnormality

–103–

PURY-P400, P500YMF-C specifications

Mitsubishi Electronics has long been a leader in the HVAC industry, known for its innovative technology and reliable performance. Among its notable offerings are the P500YMF-C and PURY-P400 models, designed to address the diverse needs of commercial and residential applications.

The Mitsubishi P500YMF-C is a high-performance outdoor unit that showcases energy efficiency and advanced refrigerant technology. It employs a sophisticated inverter-driven compressor, which optimizes energy usage by adjusting its speed based on the specific heating and cooling demands of the environment. This flexibility helps to minimize energy consumption while ensuring optimal comfort.

One of the standout features of the P500YMF-C is its ability to provide consistent heating and cooling even in extreme outdoor temperatures. The unit can operate effectively in low-temperature conditions, making it ideal for regions with harsh winters. Furthermore, the system is designed with a robust build, ensuring durability and longevity.

On the other hand, the PURY-P400 is an indoor multi-split system that complements the outdoor unit perfectly. It's designed for versatility and efficiency, capable of accommodating multiple indoor units connected to a single outdoor unit. This feature is particularly beneficial for larger spaces or buildings where different zones require individual climate control.

The PURY-P400 incorporates Mitsubishi's advanced filtration technology, which significantly improves indoor air quality. It features a multi-layer filtration system that effectively removes dust, allergens, and other particulates from the air, ensuring a healthier environment for occupants.

Both systems utilize R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants. This not only makes them more eco-friendly but also complies with emerging environmental regulations. The ease of installation and operation of these units is another noteworthy characteristic, with intuitive controls and user-friendly interfaces that facilitate seamless integration into existing systems.

In summary, the Mitsubishi P500YMF-C and PURY-P400 represent a fusion of technology, efficiency, and user-centric design. With a range of features aimed at enhancing performance and environmental sustainability, these models are an excellent choice for anyone looking to invest in a reliable and efficient HVAC system. Whether for residential or commercial use, Mitsubishi’s offerings continue to set the standard in comfort and efficiency.

Mitsubishi Electronics PURY-P400, P500YMF-C specifications 103

Models: PURY-P400 P500YMF-C

Trouble Delay Content

Preliminary liquid pipe temperature sensor abnormality (TH5)

1211

–103–

PURY-P400, P500YMF-C specifications