[3] Refrigerant Volume Adjustment Mode Operation

(1)Procedure

Depending on the operating conditions, it may be necessary either to charge with supplementary refrigerant, or to drain out some, but if such a case arises, please follow the procedure given below.

1Switching the function select switch (SW2-4), located on the outdoor unit’s control board, ON starts refrigerant volume adjustment mode operation and the following operation occurs. (Refrigerant recovery mode and oil recovery mode will be invalid.)

1 2 3 4 5 6 7 8 9 10

2Additionally, if the LED monitor display switch (SW1) on the outdoor unit’s control board is set to ON , the accumulator’s liquid level is indicated by the LED lighting position.

AL = 0 (No fluid in accumulator)

AL = 1 (Liquid in accumulator)

AL = 2 (Overcharge)

Notes 1 Even if AL = 1 for a short time after operation in the refrigerant volume adjustment mode starts, as time passes (as the refrigeration system stabilizes), it may change to AL = 0.

Notes 2 As the refrigerant volume can not be adjusted in the heating mode, retrieve the refrigerant, evacu- ate air and then fill the specified volume of refrigerant if it is necessary to adjust the refrigerant volume in the winter season.

Notes 3 A refrigerant volume adjustment performed in the cooling mode must be done with a gauge reading of 13 kg/cm2G or higher.

If the pressure does not reach this guage reading the refrigerant cannot be collected.

Therefore, collect used refrigerant and evacuate the unit completely, and then fill new refrigerant up to a specified quantity.

Notes 4 Judgment by the AL is at best only a rough guideline. Please do not add refrigerant based on the AL reading alone. (Be sure to obtain calculations of the correct amount before adding refrigerant.)

Notes 5 When supplementing the refrigerant volume, please be careful to charge with liquid refrigerant.

TH1

 

 

 

 

 

 

 

 

SC11

 

 

 

 

 

 

 

 

1

2

3

4

5

6

7

8

9 10

1

2

3

4

5

6

7

8

9 10

ON

ON

SC16

1 2 3 4 5 6 7 8 9 10

ON

Pd (High pressure)

1 2 3 4 5 6 7 8 9 10

ON

–62–

Page 63 Page 65
Page 64
Image 64
Mitsubishi Electronics P500YMF-C Refrigerant Volume Adjustment Mode Operation, Procedure, TH1, SC11 SC16, Pd High pressure
Page 63 Page 65

PURY-P400, P500YMF-C specifications

Mitsubishi Electronics has long been a leader in the HVAC industry, known for its innovative technology and reliable performance. Among its notable offerings are the P500YMF-C and PURY-P400 models, designed to address the diverse needs of commercial and residential applications.

The Mitsubishi P500YMF-C is a high-performance outdoor unit that showcases energy efficiency and advanced refrigerant technology. It employs a sophisticated inverter-driven compressor, which optimizes energy usage by adjusting its speed based on the specific heating and cooling demands of the environment. This flexibility helps to minimize energy consumption while ensuring optimal comfort.

One of the standout features of the P500YMF-C is its ability to provide consistent heating and cooling even in extreme outdoor temperatures. The unit can operate effectively in low-temperature conditions, making it ideal for regions with harsh winters. Furthermore, the system is designed with a robust build, ensuring durability and longevity.

On the other hand, the PURY-P400 is an indoor multi-split system that complements the outdoor unit perfectly. It's designed for versatility and efficiency, capable of accommodating multiple indoor units connected to a single outdoor unit. This feature is particularly beneficial for larger spaces or buildings where different zones require individual climate control.

The PURY-P400 incorporates Mitsubishi's advanced filtration technology, which significantly improves indoor air quality. It features a multi-layer filtration system that effectively removes dust, allergens, and other particulates from the air, ensuring a healthier environment for occupants.

Both systems utilize R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants. This not only makes them more eco-friendly but also complies with emerging environmental regulations. The ease of installation and operation of these units is another noteworthy characteristic, with intuitive controls and user-friendly interfaces that facilitate seamless integration into existing systems.

In summary, the Mitsubishi P500YMF-C and PURY-P400 represent a fusion of technology, efficiency, and user-centric design. With a range of features aimed at enhancing performance and environmental sustainability, these models are an excellent choice for anyone looking to invest in a reliable and efficient HVAC system. Whether for residential or commercial use, Mitsubishi’s offerings continue to set the standard in comfort and efficiency.
Top Page Image Contents