Mitsubishi Electronics WD-62527, WD-62528, WD-52528 manual Back Panel, WD-52527 WS-62527

Back Panel

				
									
INPUT				COMPONENT
			YPbPr (480i/480p/720p/1080i)
			1	2
1		2			Y		INPUT	OUTPUT
							DVI
								AUDIO	RECORD
S-VIDEO						Analog Audio		OUTPUT	OUTPUT
					Pb	1	2		VIDEO
VIDEO					Pr				AUDIO-
									LEFT/
					AUDIO-				(MONO)
AUDIO-
LEFT/					LEFT/
(MONO)					(MONO)				AUDIO-
									RIGHT
AUDIO-					AUDIO-
RIGHT					RIGHT
						MONITORLINK™/HDMI
						VIDEO 480i/480p/720p/1080i			
						1	2
						AUDIO PCM LINEAR
									SERVICE
',INK¸									PORT
		IR EMITTER							
		Net Command¸
DTV/CABLE/
VHF/UHF
USE WITH					DIGITAL
CableCARD	TM
		ANT 1 / MAIN		ANT 2 / AUX	AUDIO	CableCARD™ USE WITH ANT 1 CARD TOP
					OUTPUT

			IEEE 1394
			INPUT/
			OUTPUT
			

WD-52527 WS-62527

1.Antenna (ANT-1 MAIN, ANT-2 AUX)

ANT-1 MAIN and ANT-2 AUX can each receive both digital and analog over-the-air channels from a VHF/UHF antenna or non-scrambled digital/analog cable channels.

Your primary viewing signal source should be connected to ANT-1 MAIN. ANT-1 MAIN must be used to view premium subscription cable TV service authorized by the CableCARD™ access card. The CableCARD access card is provided by your local cable company. ANT-2 AUX can continue to receive over-the-air or non-scrambled cable signals.

2. IR Emitter-NetCommand®

Two jacks are provided for connecting IR emitters. IR Emitters connected to these jacks are used by the NetCommand system of the TV to control external analog devices such as VCRs, DVDs, cable boxes, satellite receivers and audio receivers.

3. Input-1, -2

Input 1 and 2 can be used for the connection of a VCR, Super VHS (S-VHS) VCR, DVD player, standard satellite receiver or other A/V device to the TV. Please note that if S-VIDEO and VIDEO are available for the video input, you must choose to connect only one. They cannot both be connected at the same time.

4. Component-1, -2 Inputs YPbPr (480i/480p/720p/1080i)

Component-3 is available on WD-52528 and WD-62628.

These inputs can be used for the connection of devices with component video outputs, such as a DVD player, external HDTV receiver or compatible video game system. Please see Appendix B for signal compatibility.

5. HDMI™

The HDMI™ (High Definition Multimedia Interface) supports uncompressed standard and high definition digital video formats and existing digital PCM audio formats. If using a cable box, the HDMI input supports both video and audio using a single cable.

18 Chapter 1. Television Overview