Mitsubishi Electronics WD-62527, WD-62528, WD-52528 manual Name Screen, Audio Output to AVR Screen

Models: WD-62528 WD-52528 WD-62527

1 110
Download 110 pages 60.95 Kb
Page 45
Image 45

Edit NetCommand®, Add an A/V Receiver, continued

Name Screen

Figure 11

The Name screen allows you to change the default name for the A/V receiver to a custom name of up to eight characters (including a blank space), selecting from letters, numbers, and nine different characters. Using the TV’s remote, press ADJUST or to select each letter, then press ENTER to move to the next position. Press CANCEL to delete the current letter and move back one character position. When in the first position, the CANCEL button will return the name to the default name.

Figure 11. Name screen

Finish Screen

Figure 13

To finalize your selections and complete the A/V receiver setup, select Finish from the Finish screen.

Note: If you connected the audio output of other devices directly to the A/V Receiver, you must use the “Change” function of the Edit NetCommand menu and select each device to assign the correct A/V Receiver input to be used with each device.

Figure 13. Finish screen

Audio Output to AVR Screen

Figure 12

Use this screen to select which A/V Receiver input is connected to AUDIO OUTPUT on the TV back panel. Press ADJUST to select Next> and move to the Finish screen.

IMPORTANT

NetCommand does not allow you to delete an A/V receiver or change the connections for a device (such as the TV or a DVD player) if the A/V receiver is currently being used. To delete or change the A/V receiver connections, you must be listening to the TV speakers.

Figure 12. Audio Out to AVR screen

Chapter 3. NetCommand Setup and Editing 45

Page 45
Image 45
Mitsubishi Electronics WD-62527, WD-62528, WD-52528 manual Name Screen, Audio Output to AVR Screen