Mitsubishi Electronics WD-52528 WD-62528, Output Audio Output, Record Output, Service Port

Back Panel, continued

		
							
INPUT		COMPONENT
	1	YPbPr (480i/480p/720p/1080i)		3
		2
1	2			Y		INPUT	OUTPUT
						DVI
							AUDIO	RECORD
S-VIDEO					Analog Audio		OUTPUT	OUTPUT
				Pb	1	2		VIDEO
VIDEO				Pr				AUDIO-
								LEFT/
				AUDIO-				(MONO)
AUDIO-
LEFT/				LEFT/
(MONO)				(MONO)				AUDIO-
								RIGHT
AUDIO-				AUDIO-
RIGHT				RIGHT
					MONITORLINK™/HDMI
					VIDEO 480i/480p/720p/1080i
					AUDIO PCM LINEAR
					1		2
',INK¸								SERVICE
								PORT
	IR EMITTER
	Net Command¸
DTV/CABLE/
VHF/UHF
USE WITH			DIGITAL
CableCARDTM			AUDIO	CableCARD™ USE WITH ANT 1 CARD TOP
ANT 1 / MAIN		ANT 2 / AUX	OUTPUT

IEEE 1394

INPUT/

OUTPUT

   





WD-52528 WD-62528

Use this input to connect to EIA/CEA-861 compliant devices such as a high definition satellite receiver, cable box, or DVD player. This input supports 480i, 480p, 720p and 1080i video formats. It is not intended for use with personal computers or devices outputting video signals at computer resolutions, such as SVGA or XGA.

This input can also be used as a DVI connection with separate analog audio inputs. An optional HDMI-to-DVI adaptor or cable will be necessary to make this connection and may be available from your local electronics retailer. When using the optional HDMI-to-DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device.

This input is High-Bandwidth Digital Copy Protection compliant (HDCP).

6. Output: Audio Output, Record Output

AUDIO OUTPUT sends analog audio of the program currently shown on the screen to an A/V surround sound receiver or stereo system. Digital audio from digital channels, FireWire® (DTV Link/IEEE 1394) devices and HDMI devices is converted to analog audio by the TV. If you do not have a digital A/V receiver, this should be the only audio connection between the TV and your analog A/V receiver or stereo system.

RECORD OUTPUT sends analog audio and video to a VCR for recording purposes. These signals may not be the same as those of the program that is currently being shown on screen. Signals from digital channels and FireWire (IEEE 1394) devices are converted to analog signals. There is no video signal when copy restrictions are in effect. Audio alone is output when Component 1, 2, or 3, or the HDMI input is selected for recording.

7. Service Port

This input is for use by Authorized Mitsubishi Servicers only or for authorized software updates.

8. DVI Analog Audio

Unlike HDMI, DVI does not carry audio information on the same cable. Use these analog stereo audio inputs when using the HDMI input with a device that outputs DVI instead of HDMI.

Chapter 1. Television Overview 19