Mitsubishi Electronics WD-Y57aa Connection Type into the TV Effect on Home Recording, Hdmi or DVI

Chapter 2. TV Connections 21

Digital Video and Home Recording

The table below will help you decide which type of connection to use for digital video. Digital video comes to your home in a compressed state, whether received on recorded media (e.g., disc) or broadcast over the air, over cable, or via satellite. Some compressed digital video is available for recording as noted in the table.

Connection Type into the TV	Effect on Home Recording
HDMI or DVI	You cannot record the resultant uncompressed video sent to the TV
Compressed video is converted to	via HDMI or DVI.
uncompressed form by an external device
such as a cable box, satellite receiver, or
DVD player before it is sent to the TV on an
HDMI or DVI cable.
IEEE 1394 (FireWire®) Connections	You can record compressed digital video either
Your TV can receive and decode digital	• on compatible digital recorders as digital signals using IEEE 1394
channels, MPEG2 compressed digital video,	connections
and Dolby Digital audio.	• converted to analog signals and recorded as standard-definition
	composite video from the MONITOR OUT jack
	You may be unable to record some programming because of copy restric-
	tions added by the content owners.

HDTV Cable Box or Satellite Receiver with Component Video

If your cable box or satellite receiver has HDMI or DVI outputs, use the connections for HDMI or DVI video devices described later in this chapter.

Required: RCA component video cables, left/right analog audio cables.

A coaxial splitter, available at most electronic supply stores, may be required to complete this installation.

1.Connect the cable from the outside cable or satel- lite service to CABLE IN or SATELLITE IN on the cable box or satellite receiver. See your device’s owner’s guide for instructions and cable compatibility.

2.Connect RCA-type cables from the Y Pb Pr outputs on the HDTV cable box or satellite receiver to Com- ponent on the TV back panel, matching the colored connections.

3.Connect left (white) and right (red) audio cables from the HDTV cable box or satellite receiver to Compo- nent /AUDIO LEFT and AUDIO RIGHT on the TV back panel.

4.Optional: To allow use of the Split Screen feature with channels from ANT 1 and the cable box or satellite receiver, connect the incoming terrestrial antenna or cable service (not satellite) to ANT 1/MAIN on the TV back panel. A coaxial splitter, available at most electronics supply stores, may be required to com- plete this installation.

Note: To receive the benefits of digital surround sound, con- nect the digital audio output from your cable box or satellite receiver directly to your digital A/V receiver.

$"#-& */ PS
4"5&--*5& */				
									"6%*0
						:
						1C				-
						1S				3
*ODPNJOH
"OUFOOB PS
$BCMF							
											
									$0.10/&/5		.0/*503
*ODPNJOH											065
	47*%&0
								:			7*%&0
"OUFOOB PS
	7*%&0			)%.* $0.1"5*#*-*5:				1C
$BCMF				7*%&0 JQQJQ							-&'5
	"6%*0			$0.10/&/5 $0.1"5*#*-*5:
				7*%&0 JQQJ
	-&'5			%7** 1$ $0.1"5*#*-*5:		)%.*  %7* "6%*0		1S
	.0/0										3*()5
				3&'&3 50 08/&34 (6*%&			
	"6%*0				"6%*0
	3*()5				-&'5						-&'5
					.0/0						"6%*0
			
											065
			*/165		"6%*0						3*()5
					3*()5
	"/5   "69	"/5  ."*/		64& 8*5)
				$BCMF$"3%™
											-&'5
											1$%7*
											"6%*0
											3*()5
	$BCMF$"3%™ 64& 8*5) "/5  $"3% 501
					)%.*			1$  %7*
	%*(*5"-		*&&& 
	"6%*0
	065

Figure 1. Connecting an external HDTV receiver with component video connections