Mitsubishi Electronics WD-Y57aa manual Setup Menu, Setting the Clock Automatically, On/Off

Chapter 3. TV Setup 37

Setup Menu, continued

Note:

•If using a CableCARD™, the complete list of available channels is provided through the CableCARD and the ANT 1 option is grayed out.

•In the TV Guide On Screen® system, the chan- nels displayed and the order in which they are displayed are independent of the TV’s channel memorization. Refer to the TV Guide On Screen Interactive Program Guide User’s Manual for detailed instructions on editing channels shown in this guide.

Clock (Setup Menu)

Set the clock if you wish to use the TV’s Timer function or schedule NetCommand-controlled recordings. You can use either the manual or auto method to set the clock.

Note: If Clock Setting is set to Manual, each time the time change occurs, you must open this menu and set the TV’s clock ahead or back.

If you have selected Auto for Clock Setting, the TV’s clock adjusts automatically to daylight savings time.

Setting the Clock Automatically

Select the Time Zone and the Daylight Savings (DST)

options for your state. Press to select Applies or Ignore. You may then tune to a channel on ANT 1 or ANT 2 that uses Extended Data Service (XDS) time data, typically a PBS channel. With Auto selected, the TV auto- matically retrieves the correct time and date information from this channel.

Be aware that if a channel displays incorrect time informa- tion, it is because of information sent from the broadcaster and is not a defect of the TV.

Note: You may find that some channels send the incor- rect time and the TV clock is reset every time you tune to those channels. To prevent unwanted clock resets, first use the Auto method to set the clock from a channel sending the correct time, then change the method to Manual.

Timer (Setup Menu)

Figure 4. Clock submenu

Setting the Clock Manually

Time

With the hour highlighted in yellow characters, press repeatedly to slowly increment the hour and associated AM/PM indicator or press and hold to quickly increment the hour. Press ENTER to highlight the minutes in yellow.

Press to set the minutes. Press to move to the Date box.

Date

With the month highlighted in yellow characters, press to select the correct month. Press ENTER to highlight the

day. Press to select the correct day. Press ENTER

to highlight the year. Press to select the current year. Press to move to the Time Zone box.

Time Zone

Select your correct time zone. Press or to select the time zone for your area (Atlantic, Eastern, Central, Mountain, Pacific, Alaska or Hawaii). Press to move to the Daylight Savings box.

Daylight Savings

Press or to select either Applies or Ignore, depending on whether or not daylight savings time is used in your area.

Figure 5. Timer submenu

The Timer feature allows you to set a day and time for the TV to turn on automatically and the device and channel to display when it switches on. If the TV is already on at the requested time, the TV automatically tunes to the channel you designated in the Timer menu.

When the Timer turns on the TV, the screen displays the message “Press a button for the TV to stay on.” Press any button on the remote control within five minutes if you wish the TV to remain on.

Note: The TV clock must be set before you can use the Timer feature.

On/Off

Press to enable or disable the Timer. Press to move to the Day box.