![OUTSIDE COMBUSTION AIR](/images/new-backgrounds/45820/4582037x1.webp)
OUTSIDE COMBUSTION AIR | 624WBPF Woodburning Fireplace | |
|
|
|
Installing Model 403 Duct Connector
1.Push insulation back approximately 2” from the end of each duct.
2.Slip each duct over duct connector until an equal length of connector extends into each duct.
3.Place duck clamp over the end of each duct. Tighten duct clamp down snuggly.
4.Push insulation back into place and over duct clamp.
Figure 23 | 2“ |
App.
1 | 2 | 3 |
Loop Disengaged | Slip Band | Snap Screw |
Clamp Around | Through | Down and |
Duct | Housing | Tighten |
FP1906
Figure 24
Approximately 2”
Duct Connector
Insulation
FP1907 | Duct Clamp |
|
Figure 25
Typical Methods
of Outside Air Kit
Installation
FP2355
53D9052 | 19 |