Monessen Hearth DFS32PVC, DFS36NVC, DFS42NVC, DFS32NVC, DFS42PVC manual Fireplace Framing, 1/2 or 5/8

FIREPLACE FRAMING

If unit is to be “built in,” fireplace framing can be built before or after the appliance is set in place. BE SURE THAT ALL

PACKING MATERIAL HAS BEEN REMOVED FROM THE UNDERSIDE OF THE UNIT PRIOR TO SETTING THE FIREBOX IN PLACE. Construct fireplace framing following Figures 9 through 12. Refer to Figure 2 on page 9 for fireplace dimensions. The framing headers may rest directly on top of the firebox.

The fireplace may be installed directly on a combustible floor or a raised platform of an appropriate height. Do not place fireplace on carpeting, vinyl, tile or other soft floor coverings. It may, however, be placed on flat wood, plywood, particle board or other hard surfaces. Be sure fireplace rests on a solid continuous floor or platform with appropriate framing for support and so that no cold air can enter from under the firebox.

Anchor fireplace to the side framing members using optional nailing flange kit. See installation instructions included with the kit.

D

						F
			C		G
			A
			E	Unfinished/rough
		Figure 9 - Corner Installation		framing surface
WARNING
	shown in Figure 8.
	Optional bottom radiant panel
	cannot be covered. Optional top
	radiant panel can be covered as

	DFS32NVC	DFS36NVC	DFS42NVC
	DFS32PVC	DFS36NVC	DFS42NVC
A	37¼"	41¼"	47¼"
B	35"	35"	35"
C	29"	32"	38"
D	14⅞"	16⅜"	19⅜"
E	61¾"	68⅞"	74⅞"
F	30⅞"	34½"	37½"
G	15½"	17½"	17½"
H	43¾"	48¾"	53"

C

G

Unfinished/rough

A

1/2" or 5/8"

framing surface

Figure 10- Inside Chase Installation

or

equivalent

C

clearance

for drywall/

finishing

G

B

A

Unfinished/rough

5/8" or equivalent

A

Figure 12- Recessed Installation

framing surface

clearance for

Figure 11 - Stud Location

drywall/finishing

materials

71D0532 15