FIREPLACE FRAMING
When finishing a custom cabinet, mantel, or other
DFS32NVC DFS36NVC DFS42NVC
DFS32PVC DFS36PVC DFS42PVC
K 37⅞"41⅞"47⅞"
J 35⅞"35⅞"35⅞"
|
|
WARNING | WARNING |
| The fireplace must be installed giving |
| full consideration to the clearance and |
| height requirements identified in this |
| manual. |
|
|
K
J
Figure 13 - Custom Cabinet
1.Bend out the nailing flanges located on each side of the firebox.
2.Slide the firebox into prepared framing or position firebox in its final position and frame later.
3.Level the firebox by checking the top edge of the firebox. Shim if necessary.
4.Anchor firebox to the side framing members using 8d nails or other suitable fasteners. Refer to Figure 14.
5.The canopy must be installed for safe operation of the heater. Refer to page 12 for canopy installation details.
Nail Sides |
Through Nailing |
Flanges |
Figure 14 - Location of Nailing Flanges
16 | 71D0532 |
