Ball Knob
I | (C) Hex Bolt | |
(A) | ||
~ | ||
|
Hairpin
Cotter'
(E),
Flat
Washer
e~
#)
Depth Bar
Insert clevis pin (0) through the tine shield
and depth bar assemblies. Secure with hairpin~cotter
(E). See figure 4.
3. Insert hex bolt (A) into the upper hole of the |
depth bar assembly. Place flat washer (8) onto |
the hex bolt and thread ball knob (C) onto the |
Clevis
Shield Pin (0)
Assembly
FIGURE 4.
FIGURE 5.
~
hex bolt. See figure 4. Tighten securely. |
SIDE SHIELD INSTALLATION
Mount s,de shields (AB) over the weld bolts on the end cover assemblies. Secure with belleville
HANDLE ASSEMBLY
NOTE
Left and right is determined from
the operator's position, standing behind the tiller.
1. Place right handle (AA) in position on the right side of the tiller. Insert hex bolts (F) through belleville washers (G), handle and mounting
4bracket. See figure 6. Secure with hex nuts (I) and lock washers (H).
2.Repeat step 1 for left handle (AE) on the left side of the tiller.
FIGURE 6
5
