305.book Page 79 Tuesday, April 15, 2003 11:15 AM
Options
Installation Settings
Tune in Satellite Signal. This option allows you to see the strength of the signal your antenna is receiving.
Set VCR Code. This option allows you to store your VCR code in your receiver. When you use timers and want to record your favorite program, your receiver will control your VCR
Set Remote Control Address. This option allows you to control up to four receivers in a centralized area with one or more remote controls. Each receiver requires a separate address. The default address is 000.
Using the remote control:
•Press the Options button.
•Choose option 6 (Change System Settings).
•Choose option 3 (Installation Settings).
•On the Installation Settings menu, choose option 3 (Set Remote Control Address). Now follow the instructions on the screen.
•If you have four receivers, you will have to change the addresses on three of them: they will have addresses of 000, 001, 002, and 003.
Note: To program your remote control for each receiver, hold down the SAT key on the remote control until the light flashes. Once the light begins to flash enter the desired address (000, 001, 002, or 003).
DSR305 User Guide | 79 |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
