Motorola 305 manual Completing the Receiver Connections to a Third Component, Connections to TV

305.book Page 37 Tuesday, April 15, 2003 11:15 AM

Installation

Completing the Receiver Connections to a Third

Component

You will need to make changes to connect your VCR.

•Connect the top/left TV port on the back panel of the receiver to the IN port on the VCR. If you have already connected this cable to your TV you must disconnect and connect it to your VCR.

•Connect the OUT port(s) on the VCR to the VHF IN port(s) on the TV.

Connections to TV

Complete the following steps if you only plan to connect the satellite receiver to an audio/video monitor:

•Using standard RCA-type audio/video cables, connect the TV (VIDEO output) port on the rear panel of the receiver to the video input port on the TV (or TV monitor using the baseband inputs).

•Using standard RCA-type audio/video cables, connect the two speaker (R and L) ports on the back panel of the receiver to the audio input ports on the TV (or TV monitor using the baseband inputs).

Connections to TV and VCR

Complete the following steps if you plan to connect the satellite receiver to a TV and VCR or audio/video monitor:

•Using standard RCA-type audio/video cables, connect the TV (VIDEO output) port on the rear panel of the receiver to the video input port on the VCR.

DSR305 User Guide 37