Motorola 6809502A01-C manual Turn it on & off, To charge from your computer

Power Key

2Plug the other end of the charger into the appropriate electrical outlet.

3When your phone displays Charge Complete, remove the charger.

Tip: Relax! You can safely leave the charger connected to the phone after charging is complete. This will not damage the battery.

When you charge the battery, the battery level indicator at the upper right of the screen shows charging progress. At least one segment of the indicator must be visible to ensure full phone functionality while charging.

To charge from your computer:

You can charge your phone’s battery by connecting a cable from your phone’s mini-USB port to a high-power USB connector on a computer (not a low-power one, such as the USB connector on your keyboard or bus-powered USB hub). Typically, USB

12essentials

high-power connectors are located directly on your computer.

Both your phone and your computer must be turned on, and you must have correct software drivers installed on your computer. Cables and software drivers are available in Motorola OriginalTM data kits, sold separately.

turn it on & off

To turn on your phone, press and hold Ofor a few seconds or until the display turns

on. If prompted, enter your four-digit unlock code.

To turn off your phone, press and hold Ofor two seconds.