Motorola CPEI 890 user manual Installation, Before you Begin, Easy Setup

Installation 2

Chapter 2: Installation

Overview

To install the Desktop CPEi 890 Series, review the following sections:

•Before You Begin

•Easy Setup

Before you Begin

Before you begin installation, check that you have received the following items with your Desktop CPEi 890:

Table 2-1In the box with your CPE, you should have

Item	Description
AC Power Adapter	Power adapter cord connects the Desktop
	CPE to an AC electrical outlet.
Ethernet Cable	The Ethernet cable connects the Internet
	port on your Desktop CPE to your PC or
	laptop computer.
Desktop CPEi 890 Quick Start Guide	Desktop CPEi 890 Quick Start Guide

In addition, you need:

•A computer

•An RJ-11 telephone cable (optional). Two RJ-11 telephone cables are required if your service provider has supplied you with two telephone numbers.

Easy Setup

The CPE is easily set up in your home. Basic installation equipment needed are the power adapter, Ethernet cable, a PC or laptop computer and the CPE device.

If you want to use the VoIP functionality, you need an RJ-11 phone cable and a telephone.

Perform the following tasks before attaching the power cord or powering up the unit:

•Stand the CPE on a flat surface.

•Plug the AC power adapter cord into an AC outlet.

•Plug one end of the Ethernet cable into the Ethernet connector on the back of the unit.

•Plug the other end of the Ethernet cable into the Ethernet connector of your computer.

•To use VoIP functionality of the phone, plug one end of the phone line into the activated phone connector on the back of the unit. Phone line activation is dependent upon your service contract.

•Plug the other end of the phone line into the phone line connector of your telephone.

2-1

JAN 2011