Motorola CPEI 890 Advanced Setup, Procedure to Log into the CPE, Before you Begin Configuration

2 Installation

Advanced Setup

The CPE can also be used to connect to a multi-port switch (hub) - purchased separately from the CPE. Connecting the CPE device to a hub allows you to connect more than one computer to your CPE device.

Procedure to Log into the CPE

Before you Begin Configuration

Some settings on your computer need to be verified or changed to ensure that your computer configuration can support the Desktop CPE.

Verify that the IP addresses and DNS settings are automatically generated in your Local Area connection of your Internet Protocol (TCP/IP) properties. Refer to the chapter titled “Configuring TCP/IP” for additional information.

Logging in to the CPE

Use the following procedure to log into the Desktop CPE:

1.On a computer that is connected to the Desktop CPE, open a web browser.

2.In the Address or Location field, type http://mywimax. and press ENTER to display the login screen.

Include the period (.) after http://mywimax. in order to access the login screen.

NOTE

Alternatively, you may enter the IP address: http://192.168.15.1 into the address field in order to gain access to your CPE. If you cannot access the CPE, refer to the chapter titled: Configuring TCP/IP for more information.

3.The Welcome to Motorola WiMAX CPE screen is displayed and prompts you for a password.

2-2

JAN 2011