Level 1 and 2 Service Manual | Disassembly |
Removing and Replacing the Keyboard
1.Remove the battery cover, battery, rear housing, and transceiver PC board, as described in the procedures.
2.Using the disassembly tool, gently pry up the keyboard disconnecting it from the transceiver PC board as shown in Figure 9.
Keyboard
Disassembly Tool
Figure 9. Removing and Replacing the Keyboard3.To replace, align the keyboard connector of the keyboard with the keyboard connector on the transceiver board and press it into place.
4.Replace the transceiver PC board, rear housing, battery, and battery cover as described in the procedures.
April 21, 2004 | 23 |