Level 1 and 2 Service Manual | Disassembly |
Removing and Replacing the Volume Switch Dome
1.Remove the battery cover, battery, rear housing, and transceiver PC board, as described in the procedures.
2.Lift the switch domes out from the front housing as shown in Figure 13.
Plastic
Tweezers
Volume Switch
Dome
Front Housing
Figure 13. Removing and Replacing the Volume Switch Dome3.To replace, insert the volume switch dome into the proper location in the front housing.
4.Replace the transceiver PC board, rear housing, battery, and battery cover as described in the procedures.
April 21, 2004 | 27 |