Level 1 and 2 Service Manual | Disassembly |
Removing and Replacing the Speaker
1.Remove the battery cover, battery, rear housing, and circuit board as described in the procedures.
2.Use the disassembly tool or plastic tweezers to release the speaker from the front housing as shown in Figure 11. The speaker should come away easily.
Front Housing
Plastic
Tweezers
Speaker Contacts
Speaker
Figure 11. Removing and Replacing the Speaker3.To replace, align the speaker with its socket with the speaker contacts facing as shown.
4.Gently press the speaker into place.
5.Replace the transceiver PC board, rear housing, battery, and battery cover as described in the procedures.
April 21, 2004 | 25 |