Disassembly | E398/E399 GSM |
Removing and Replacing the Keypad
1.Remove the battery cover, battery, rear housing, and transceiver PC board, as described in the procedures.
2.Lift the keypad up from one corner as shown in Figure 12 and remove it from the front housing.
Front Housing |
| Keypad |
|
|
|
|
|
|
Plastic
Tweezers
Figure 12. Removing and Replacing the Keypad3.To replace, align the keypad with the front housing and press it into place.
4.Replace the transceiver PC board, rear housing, battery, and battery cover as described in the procedures.
26 | April 21, 2004 |