Disassembly | E398/E399 GSM |
Removing and Replacing the Camera From MFT Chamber Assembly
1.Remove the battery cover, battery, rear housing, and transceiver PC board as described in the procedures.
2.Disengage the two plastic MFT Chamber assembly side connectors from the transceiver PC board and lift up the MFT Chamber assembly.
3.Using the disassembly tool, gently pry up the camera flex connector from the transceiver PC board.
4.Using plastic tweezers, gently pry the connection between the camera flex and the MFT Chamber assembly separating the adhesive.
DisassemblyMFTChamberToolDisassemblyPlasticTweezersTool
sassemblyCameraFlexToo
sseCamblyera T
Figure 16. Removing and Replacing the Camera From the MFT ChamberAssembly5.To replace, press the MFT Chamber side of the camera flex connector onto the MFT Chamber assembly.
6.Place the camera flex connector on the transceiver PC board camera connector and press it into place.
7.Fold over the MFT Chamber assembly, aligning the camera with the camera hole in the MFT Chamber and press into place engaging the two plastic side connectors on to the transceiver PC board.
8.Replace the transceiver PC board, rear housing, battery, and battery cover as described in the procedures.
30 | April 21, 2004 |