Disassembly | E398/E399 GSM |
Removing and Replacing the Display
1.Remove the battery cover, battery, rear housing, and transceiver PC board as described in the procedures.
2.Using the disassembly tool, gently pry up the display and lift it up from the transceiver PC board as shown in Figure 14.
3.Using the disassembly tool, gently pry up the display flex connector from the transceiver PC board.
DisassemblyDispla Tool
Displayassemb
Flex Connector
Diisassembly Tooll
Disassembly
Tool
Figure 14. Removing and Replacing the Display4.To replace, place the display flex connector on the transceiver PC board display connector and press it into place.
5.Lay the display on the transceiver PC board and gently press it into place.
6.Replace the transceiver PC board, rear housing, battery, and battery cover as described in the procedures.
28 | April 21, 2004 |