Motorola i315 manual Making and Receiving Code Calls in Direct TalkSM Mode, Receive All

Direct TalkSM

Making and Receiving Code Calls in Direct TalkSM Mode

To make a code call using Direct Talk:

1Press and hold the PTT button. DT Transmit appears on the first line of the display. Begin speaking after your phone emits the Direct Talk tone.

2Release the PTT button to listen.

The tone emitted from your phone when making a Direct Talk call is 4 beeps and sounds different from the standard tone heard with on-network Direct Connect and Group Connect calls.

If you receive an error message:

•There may be no parties on your channel or code.

•You are out of range.

When you receive a code call using Direct Talk, DT Receive appears on the first line of the display.

Receive All

You can set your phone to receive Direct Talk transmissions from any phone that is set to the same channel, regardless of the code (1-15), by setting the code to Receive All. When you receive transmissions with the code set to Receive All, the display changes from Receive All to the code on which the transmission was received.

Note: You cannot initiate a code call when the code is set to Receive All. If you press the PTT button with the code set to Receive All, you will receive an error message.

To set the code to Receive All:

1From the Direct Talk idle screen, press A under Edit.

2Scroll to Code.

3Press A under Edit.

4Select Receive All.

5When you are finished, press A under Back to return to the idle screen.

29