Motorola i88s, i58sr manual Setting Up the Device, Introduction, Phone Settings, Speaker Volume

.......... Setting Up the Device

Introduction

To effectively use PC*MILERMobile in your vehicle, you should:

•Change phone settings for best in-vehicle use before you first run PC*MILERMobile

•Place your phone as close to the windshield as possible

•Power your phone from the vehicle

Phone Settings

Following are suggested changes to your phone’s settings to make

PC*MILERMobile easier to use when driving.

Speaker Volume

PC*MILERMobile provides you with both audio and visual directions when navigating to your destination.

If you are not using a headset with your phone, your phone’s speakerphone should be on in order to hear audio directions. If your speakerphone is turned off, you will see an icon at the top of your screen showing a speaker with a line through it.

To check the status of your speakerphone, power up your i88s/i58sr phone, and check to see if the speaker icon has a red line through it. If so, press the speakerphone button on the top left side of your phone (a speaker icon is on the button). A message briefly displays, indicating the speaker is on. The speaker icon on the screen no longer displays.

To set your initial speakerphone volume high enough for directions to be heard under most road conditions, from the Nextel screen, press the Menu button. Scroll to Settings and press the button under SELECT. Scroll to Voice Volume and press the button under SELECT. Highlight Speaker Vol and repeatedly press the right arrow of the 4-way navigation key until the volume setting is at 4 or 5. Then press the button under BACK to return to the Settings screen.

Display Contrast

To best see the phone’s screen in all lighting conditions, you may want to increase the screen’s contrast setting. From the Nextel screen, press the Menu button. Scroll to Settings and press the button under SELECT. Highlight Contrast and repeatedly

PC*MILERMobile User’s Guide 15