To set Contacts to show all entries:
1From the Contacts list, press m.
2Select Filter.
3Set this option to Show All.
Creating Entries
A number or address and a Contacts type are required for all Contacts entries. Other information is optional. You may enter the information in any order by scrolling through the entry details.
After you have entered the number or address, Contacts type, and any other information you want, you can press A under Done to save the entry to Contacts.
To cancel a Contacts entry at any time press, e to return to the idle screen.
To create a Contacts entry:
1To access the entry details screen: Select Contacts > [New Contact].
2If you want to assign a name to the entry: Select Name.
Enter the name. See “Entering Text” on page 33. When you are finished, press O.
Creating Entries
Tip: Press A under Browse to select a name already in Contacts.
3If you want to assign a ring tone to the name: Select Ringer.
Select the ring tone to you want to assign.
4To assign a Contacts type to the number or address being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
5To store a number or address:
Select the # field (or ID for an email address, or IP for an IP address).
Enter the number or address. For phone numbers, use the
Tip: Press A under Browse to select a number or address from Contacts, the recent calls list, or Memo.
When you are finished, press O.
6If you want to assign more options to the number, select [Options]. See “Assigning Options” on page 40.
7If you want to add more numbers or addresses to the entry:
39
